Máquina de prueba de fatiga de tres rodillos
HY-8742
Cantidad:
HY-8742 Three-Roller Fatigue Testing Machine
Based on the following standards:
Based on the following standards:
Product Description:
This machine is primarily used to test the fatigue life of vulcanized cord samples. The machine structure primarily consists of rollers, a crankshaft linkage system, a counting and timing system, a servo drive system, a current detection system, a counterweight, and a hook-and-unload fixture. The diameters of the three rollers on both sides remain constant, while the diameter of the center roller can be adjusted based on cord testing requirements. By maintaining the same center roller diameter, fatigue strength tests can be performed on cords of the same specification but using different processes or manufacturers. Alternatively, fatigue strength tests can be performed on cords of the same specification and process using center rollers of different diameters.
Technical Parameters:
1. Control Method: HMI + PLC Programmable Controller
2. Rotational Power System: Servo Control System
3. Servo Motor: 750W
4. Three-Roller Travel Speed: 365r/min (adjustable)
5. Current Detection System: Initial setting: 500mA, with a 10% (adjustable) ramp-down and shutdown
6. Base Weight of Moving Grip and Weight Holder: 20N
7. Weights: 50N: 6; 20N: 2; 10N: 1; 5N: 1
8. Roller Specifications: φ15mm, φ20mm, φ25mm, φ30mm
9. Stop Function: Configurable for stop upon reaching the specified number of times, time of arrival, or specimen breakage
10. Dimensions (approximately): 1430mm × 900m × 1200mm (L x W x H)
11. Power Supply: 1∮ AC220V 50Hz
This machine is primarily used to test the fatigue life of vulcanized cord samples. The machine structure primarily consists of rollers, a crankshaft linkage system, a counting and timing system, a servo drive system, a current detection system, a counterweight, and a hook-and-unload fixture. The diameters of the three rollers on both sides remain constant, while the diameter of the center roller can be adjusted based on cord testing requirements. By maintaining the same center roller diameter, fatigue strength tests can be performed on cords of the same specification but using different processes or manufacturers. Alternatively, fatigue strength tests can be performed on cords of the same specification and process using center rollers of different diameters.
Technical Parameters:
1. Control Method: HMI + PLC Programmable Controller
2. Rotational Power System: Servo Control System
3. Servo Motor: 750W
4. Three-Roller Travel Speed: 365r/min (adjustable)
5. Current Detection System: Initial setting: 500mA, with a 10% (adjustable) ramp-down and shutdown
6. Base Weight of Moving Grip and Weight Holder: 20N
7. Weights: 50N: 6; 20N: 2; 10N: 1; 5N: 1
8. Roller Specifications: φ15mm, φ20mm, φ25mm, φ30mm
9. Stop Function: Configurable for stop upon reaching the specified number of times, time of arrival, or specimen breakage
10. Dimensions (approximately): 1430mm × 900m × 1200mm (L x W x H)
11. Power Supply: 1∮ AC220V 50Hz
