Stroller Dynamic Durability Testing Machine
HY-962
Quantity:
HY-962 Stroller Dynamic Durability Testing Machine
According to the standard:
EN1888
Product Introduction:
This testing machine is manufactured in accordance with the EN1888.2003 standard for dynamic durability testing of push-type baby strollers. The testing method involves placing weights in the test stroller, securing the stroller to the test bench, setting the required test duration, and adjusting the necessary test speed. Upon reaching the specified time, the machine automatically stops, and visual inspection is conducted to check for any damage to the stroller. This provides a reliable basis for improving the quality of dynamic durability.
The machine can automatically stop operating upon reaching the set time and is equipped with a belt misalignment prevention device as well as an electronic safety eye device, featuring a shutdown function for any abnormal operating conditions.
Technical parameters:
1. Test Specification: Designed and manufactured as required;
2. Test work: Single or dual workstations
3. Test speed: 3~6 KM/H (adjustable);
4. Drive method: The multi-layer PUV conveyor belt is actuated by roller drive, supplemented with reinforced rollers made of special aluminum alloy conveyor belts;
5. Drive power: Taiwan City-State geared motor AC 380V 5KW; I=1:5
6. Vertical adjustment range: Max 300mm;
7. Effective width: Max 1200mm;
8. Test Counting: The PLC-controlled count is displayed as a liquid crystal digital readout;
9. Load capacity: MAX 150KG;
10. Machine power supply: AC 380V * 3 phase * 5KW;
11. Machine dimensions: approximately 4800 x 1460 x 2000 mm
12. Machine weight: approximately 2000kg
13. Impact block shape: Trapezoidal, semi-arc, or specified (four sets of aluminum alloy impact blocks).
14. Transmission belt: Imported PUV multi-layer belt, with belt circumference as required
15. Manual lifting of the fixture.
16. Control method: Delta PLC control
17. Drum size: Oversized drum with a diameter of approximately 400MM, lined with wear-resistant rubber.
18. Protection Devices: Earth leakage protection, belt misalignment mechanical-electronic switch protection, and photoelectric switch electronic eye protection.
19. Surface Treatment: The powder coating is applied using DuPont powder and baked at 200 degrees Celsius.
According to the standard:
EN1888
Product Introduction:
This testing machine is manufactured in accordance with the EN1888.2003 standard for dynamic durability testing of push-type baby strollers. The testing method involves placing weights in the test stroller, securing the stroller to the test bench, setting the required test duration, and adjusting the necessary test speed. Upon reaching the specified time, the machine automatically stops, and visual inspection is conducted to check for any damage to the stroller. This provides a reliable basis for improving the quality of dynamic durability.
The machine can automatically stop operating upon reaching the set time and is equipped with a belt misalignment prevention device as well as an electronic safety eye device, featuring a shutdown function for any abnormal operating conditions.
Technical parameters:
1. Test Specification: Designed and manufactured as required;
2. Test work: Single or dual workstations
3. Test speed: 3~6 KM/H (adjustable);
4. Drive method: The multi-layer PUV conveyor belt is actuated by roller drive, supplemented with reinforced rollers made of special aluminum alloy conveyor belts;
5. Drive power: Taiwan City-State geared motor AC 380V 5KW; I=1:5
6. Vertical adjustment range: Max 300mm;
7. Effective width: Max 1200mm;
8. Test Counting: The PLC-controlled count is displayed as a liquid crystal digital readout;
9. Load capacity: MAX 150KG;
10. Machine power supply: AC 380V * 3 phase * 5KW;
11. Machine dimensions: approximately 4800 x 1460 x 2000 mm
12. Machine weight: approximately 2000kg
13. Impact block shape: Trapezoidal, semi-arc, or specified (four sets of aluminum alloy impact blocks).
14. Transmission belt: Imported PUV multi-layer belt, with belt circumference as required
15. Manual lifting of the fixture.
16. Control method: Delta PLC control
17. Drum size: Oversized drum with a diameter of approximately 400MM, lined with wear-resistant rubber.
18. Protection Devices: Earth leakage protection, belt misalignment mechanical-electronic switch protection, and photoelectric switch electronic eye protection.
19. Surface Treatment: The powder coating is applied using DuPont powder and baked at 200 degrees Celsius.
