Computer Servo Control Chair Foot Five Claw Compression Testing Machine
HY-936
Specialized instrument for testing the compressive strength of chair foot five claws. Its testing procedure involves first applying a force of 1136KG and maintaining it for 60 seconds.After the second force removal, a third force application is performed until the five claws are directly destroyed. Fully computer-controlled, this machine can be programmed with different testing methods according to various chair types and customer requirements. It is easy to operate and supports editable report formats to meet diverse customer needs. Meanwhile, it features multiple protection functions such as capacity overload, upper and lower limit control, and leakage protection, ensuring the safe operation of the instrument at all times.
Quantity:
HY-936 Computer Servo Control Chair Foot Five Claw Compression Testing Machine
According to the standard:
According to the BFM chair foot compression standard requirements
Product Introduction：
The method of this machine is to first apply 1136KG force to the five claws and maintain a constant force for 60 seconds, then remove the force and apply 1136KG force again to maintain a constant force for 60 seconds. After removing the force, apply the force for the third time and directly destroy the five claws! This machine is fully computer-controlled and can be edited into different testing methods according to different chair steps and customer testing requirements. It is easy to operate and can open edit report formats that meet different customer requirements. At the same time, it has multiple protection functions such as capacity overload, upper and lower limits, and leakage to ensure the safe operation of the instrument at any time.
Technical Specifications:
1. Load element: 0.5 high-precision force sensor
2. Maximum test force: 5000KG
3. Accuracy level: Level 1
4. Test force testing range: 0.4% to 100% FS
5. Power accuracy: within ± 1%
6. Power decomposition degree: 1/200000
7. Power amplification factor: seven levels including X1, X2, X5, X10, X20, X50, X100, etc., with automatic wind mode switching throughout the entire process
8. Displacement indication error: within ± 1% of the indication
9. Displacement resolution: 0.005mim
10. Control system: servo drive
11. Transmission mode: servo motor
12. Motor power: 2.0kw
13. Test speed range: 0.005~500 mm/min
14. Speed accuracy: within ± 1% of the displayed value ± 1%
15. Test travel (excluding fixtures): 1000mm
16. Effective pillar spacing: 1000mm
17. Display system: HY-V independently developed material testing machine dedicated software based on Windows XP platform
18. Computer System: One set of branded computer and color inkjet printer
19. Weight: Approximately 1100kg
20. Volume: (1500 × 650 × 2100) mm
21. Power supply: AC220V 50HZ
According to the standard:
According to the BFM chair foot compression standard requirements
Product Introduction：
The method of this machine is to first apply 1136KG force to the five claws and maintain a constant force for 60 seconds, then remove the force and apply 1136KG force again to maintain a constant force for 60 seconds. After removing the force, apply the force for the third time and directly destroy the five claws! This machine is fully computer-controlled and can be edited into different testing methods according to different chair steps and customer testing requirements. It is easy to operate and can open edit report formats that meet different customer requirements. At the same time, it has multiple protection functions such as capacity overload, upper and lower limits, and leakage to ensure the safe operation of the instrument at any time.
Technical Specifications:
1. Load element: 0.5 high-precision force sensor
2. Maximum test force: 5000KG
3. Accuracy level: Level 1
4. Test force testing range: 0.4% to 100% FS
5. Power accuracy: within ± 1%
6. Power decomposition degree: 1/200000
7. Power amplification factor: seven levels including X1, X2, X5, X10, X20, X50, X100, etc., with automatic wind mode switching throughout the entire process
8. Displacement indication error: within ± 1% of the indication
9. Displacement resolution: 0.005mim
10. Control system: servo drive
11. Transmission mode: servo motor
12. Motor power: 2.0kw
13. Test speed range: 0.005~500 mm/min
14. Speed accuracy: within ± 1% of the displayed value ± 1%
15. Test travel (excluding fixtures): 1000mm
16. Effective pillar spacing: 1000mm
17. Display system: HY-V independently developed material testing machine dedicated software based on Windows XP platform
18. Computer System: One set of branded computer and color inkjet printer
19. Weight: Approximately 1100kg
20. Volume: (1500 × 650 × 2100) mm
21. Power supply: AC220V 50HZ
