Single-arm Computer Tensile Testing Machine

China Manufacturer, Model HY-932CS Universal Tensile Testing Machine (UTM), a high-quality Computerized Tensile Testing Machine, is a general-purpose testing equipment used to evaluate the mechanical properties of various materials. As a trusted Tensile Testing Machine Supplier, we offer this versatile Tensile Tester, which applies force or stress to materials to perform a variety of tests, including tearing, peeling, tension, compression, bending, shear, and torsion tests. It is widely used as Lab Equipment for precise material testing.

  

1. Load cell: 0.5 high-precision force sensor – enhancing the accuracy of this Computerized Tensile Testing Machine.
2. Capacity choice: 2KG, 5KG, 10KG, 20KG, 50KG, 100KG, 200KG (can be customized for higher loadcell) – versatile for the Tensile Tester.
3. The accuracy rating: 1 level
4. Test Force test range: 0.4% ~ 100% FS
5. Load Accuracy: ± 1% or less
6. Load Resolution: 1/200000
7. Load Magnification: X1, X2, X5, X10, X20, X50, X100, etc. throughout the seven-level automatic transmission switch.
8. Displacement error: ± 1% of indicated value
9. Displacement resolution: 0.005mm
10. Deformation measurement range: 2% ~ 100% FS
11. Deformation indication error limit: Within ± 0.5% of indicated value
12. Large deformation measurement range: (10 ~ 1000) mm
13. The large deformation indication error limit: ± 1% of indicated value
14. The large deformation resolution: 0.008mm
15. Control System: Frequency converter – a key component of the Computerized Tensile Testing Machine.
16. Transmission: AC frequency conversion motor
17. Motor Function: 1.5KW
18. The deceleration device: Italy Outes precision hollow aluminum reducer
19. Drive Alliance board: high-carbon steel forging, good mechanical strength properties, and no deformation.
20. The drive screw: Taiwan dual structure precision bowls screw
21. The guide bar: It is made by two Φ50 Korea Taijing Shaft, the surface is handled by high frequency and hard chrome plating, above HRC60.
22. Active bearings: Use Japan NSK high-carbon ball bearing.
23. Transmission system: Japan’s high-strength belt
24. The body structure: use the main frame and the control box split design.
25. Test speed range: (25～100) mm/min、(50～200) mm/min、(100～500) mm/min – adjustable for the Tensile Tester.
26. Speed accuracy: Within ± 1% of indicated value
27. Test Stroke (excluding fixtures): 600mm
28. Fixture handling: All fixtures use hard chrome plating, above HRC55
29. Dustproof device: use Taiwan anti stack dust cover to protect the ball screw against the dust, and the lifetime and precision of ball screw.
30. The surface treatment of the body: Use DuPont powder, electrostatic painting process, ensure no fade permanently cured at high temperature of 200 ℃.
31. Display System: self-development HY-V software of dedicated software for material testing machine under Windows XP platform – a feature of this Computerized Tensile Testing Machine.
32. Data transfer: the 24 bit data transfer, RS-232 data transfer, all the parameters are stored in the surrounding hardware. Computer doesn’t need any extrapolation hardware, greatly facilitate the users to replace and upgrade, as well as Computer Maintenance.
33. Multiple protection devices:
    ①.Machine opening stroke switch protection upper and lower limit stroke
    ②. An emergency stop switch brake protection
    ③. Over current, overvoltage, under current, under voltage, leakage overload
    ④. Software overload limit protection
    ⑤. Breakpoint shutdown protection
34. Volume: （500x400x1500）mm
35. Power: AC220V 50HZ
36. Weight: about 60kg