office chair armrest pressure durability testing machine According to the standard:
HY-642
Quantity:
HY-642 office chair armrest pressure durability testing machine
According to the standard:
ANSI/BIFMA X5.1
Product Introduction
This testing machine is used to test the durability of office chair armrests under reciprocating lateral pressure (at a 10 degree angle to the plumb line). Fix the office chair on the testing table and adjust the force application fixture to the appropriate position.
Technical Specifications:
1. Direction of force application: at a 10 degree angle to the plumb line
2. Force application value: 400 Newtons (90 pounds)
3. Force application fixture: 20 degree opening, 100mm wide, installed on a 10 degree inclined surface
4. Cylinder stroke: (0-80) mm
5. Rear pivot height of cylinder: 40-110cm, electrically adjustable
6. Controller: PLC touch screen control
7. Printing device: Chinese micro printing test report
8. Power supply: single-phase AC220V 0.5A
9. Cycle speed: 10-30 RPM or specified
10. Volume: (140 × 120 × 170) cm
According to the standard:
ANSI/BIFMA X5.1
Product Introduction
This testing machine is used to test the durability of office chair armrests under reciprocating lateral pressure (at a 10 degree angle to the plumb line). Fix the office chair on the testing table and adjust the force application fixture to the appropriate position.
Technical Specifications:
1. Direction of force application: at a 10 degree angle to the plumb line
2. Force application value: 400 Newtons (90 pounds)
3. Force application fixture: 20 degree opening, 100mm wide, installed on a 10 degree inclined surface
4. Cylinder stroke: (0-80) mm
5. Rear pivot height of cylinder: 40-110cm, electrically adjustable
6. Controller: PLC touch screen control
7. Printing device: Chinese micro printing test report
8. Power supply: single-phase AC220V 0.5A
9. Cycle speed: 10-30 RPM or specified
10. Volume: (140 × 120 × 170) cm
