Electronic Fabric Strength Machine
HY-026SZ
Engineered for comprehensive evaluation of fabric mechanical properties. It integrates cutting-edge technology with robust construction to deliver precise measurements, testing key properties like tensile, tearing, bursting, fixed elongation, fixed load, elasticity, suture slippage, and peeling for various textiles and related materials. Beyond textiles, it is widely applied in force, elongation, and deformation tests (including tension, compression, bending, adhesion, and creep) for materials such as rubber, plastic, leather, metal, wire, paper, packaging, and building materials, serving quality control and research needs across multiple industries.
Quantity:
Electronic Fabric Strength Tester - Precision Textile Testing Solution
The Electronic Fabric Strength Tester is a state-of-the-art digital textile tensile tester designed for comprehensive evaluation of fabric mechanical properties. This advanced fabric test equipment combines cutting-edge technology with robust construction to deliver precise measurements for quality control and research applications across multiple industries.
Electronic Fabric Strength Tester is used to test the tensile, tearing, bursting, fixed elongation, fixed load, elasticity, suture slippage, peeling and other mechanical properties of various textiles and related materials. It is widely used in tensile, compression, bending, adhesion, peeling, tearing, bursting, creep and other force, elongation and deformation tests of rubber, plastic, leather, metal, wire, paper, packaging, building materials, petrochemical industry, electrical engineering and geotechnical materials.
Instrument characteristics:
1.Electronic Fabric Strength Tester has the function of automatic fixture positioning, and automatically calibrates the fixture position when changing the fixture position, without manual ruler calibration.
2. By limiting the clamp closing air pressure and closing speed, it automatically detects whether the pneumatic fixture has abnormal behavior, reduces human error, and effectively reduces the risk of fingers being pinched by the pneumatic fixture.
3. TEDS sensor automatic recognition function, after replacing the sensor, the instrument can automatically identify the measurement range and automatically correct it in the software background.
4. A variety of fixtures can be customized to adapt to different materials and test standards.
5. The powerful machine comes with hundreds of test programs and a huge library of preset test methods, which can meet the most commonly used standards such as GB, FZ, AATCC, ASTM, ISO, JIS, EN, MS, LTD, etc.
6. Electronic Fabric Strength Tester has guided operation steps to make operation simpler and more convenient.
7. It can realize standard customization, parameter customization, process customization, result customization and report customization.
8. The test report is presented in a variety of ways (scatter plot, curve chart, raw data, etc.).
9. Powerful calibration and fixture support functions.
10. Fabric Strength Testing Machine has the function of instrument Internet of Things, which can realize the background operation status, fault and other information of the instrument.
11. A variety of test unit systems are available.
12. The interface design is user-friendly, and the instrument status and fault prompts are displayed when the machine is turned on.
13. Upper and lower limit travel of beam displacement, overload protection, overvoltage, overcurrent, overheating, undervoltage, undercurrent, leakage automatic protection, emergency switch manual protection, etc.
14. Electronic Fabric Strength Tester's atmosphere light display effect and voice broadcast function.
15. High-precision photoelectric or non-contact video extensometers are optional.
16. Equipped with pneumatic replaceable chucks, more than 100 types of clamps are optional, and can be customized according to customer materials.
Hardware design:
Instrument characteristics:
1.Electronic Fabric Strength Tester has the function of automatic fixture positioning, and automatically calibrates the fixture position when changing the fixture position, without manual ruler calibration.
2. By limiting the clamp closing air pressure and closing speed, it automatically detects whether the pneumatic fixture has abnormal behavior, reduces human error, and effectively reduces the risk of fingers being pinched by the pneumatic fixture.
3. TEDS sensor automatic recognition function, after replacing the sensor, the instrument can automatically identify the measurement range and automatically correct it in the software background.
4. A variety of fixtures can be customized to adapt to different materials and test standards.
5. The powerful machine comes with hundreds of test programs and a huge library of preset test methods, which can meet the most commonly used standards such as GB, FZ, AATCC, ASTM, ISO, JIS, EN, MS, LTD, etc.
6. Electronic Fabric Strength Tester has guided operation steps to make operation simpler and more convenient.
7. It can realize standard customization, parameter customization, process customization, result customization and report customization.
8. The test report is presented in a variety of ways (scatter plot, curve chart, raw data, etc.).
9. Powerful calibration and fixture support functions.
10. Fabric Strength Testing Machine has the function of instrument Internet of Things, which can realize the background operation status, fault and other information of the instrument.
11. A variety of test unit systems are available.
12. The interface design is user-friendly, and the instrument status and fault prompts are displayed when the machine is turned on.
13. Upper and lower limit travel of beam displacement, overload protection, overvoltage, overcurrent, overheating, undervoltage, undercurrent, leakage automatic protection, emergency switch manual protection, etc.
14. Electronic Fabric Strength Tester's atmosphere light display effect and voice broadcast function.
15. High-precision photoelectric or non-contact video extensometers are optional.
16. Equipped with pneumatic replaceable chucks, more than 100 types of clamps are optional, and can be customized according to customer materials.
Hardware design:
1. Electronic Fabric Strength Tester frame is designed to last more than 30 years. The strong and rigid frame of high-strength materials has preloaded bearings and precision ball screws, thickened beams and base beams, and lower tension drive belts to minimize testing. The energy stored in the process results in better testing performance and more accurate modulus and strain values.
2. Precise guide rails with excellent centering and bending When performing axial tests, only systems with stable and precise rigid guide rails can obtain accurate stress and strain results to ensure that the lateral forces experienced by the specimen under load are accurate. The impact is minimal.
3. Larger advanced servo control drive system, higher reliability. The high-power servo motor enables a higher acceleration rate at the beginning of the test and a faster operating cycle during the cycle test. The dual-belt system can keep the ball screw moving synchronously and eliminate the tendency of the beam to tilt and help the system center and accurately position.
2. Precise guide rails with excellent centering and bending When performing axial tests, only systems with stable and precise rigid guide rails can obtain accurate stress and strain results to ensure that the lateral forces experienced by the specimen under load are accurate. The impact is minimal.
3. Larger advanced servo control drive system, higher reliability. The high-power servo motor enables a higher acceleration rate at the beginning of the test and a faster operating cycle during the cycle test. The dual-belt system can keep the ball screw moving synchronously and eliminate the tendency of the beam to tilt and help the system center and accurately position.
Seventh-generation digital signal processing (DSP) control technology based on embedded systems
1. High-speed, low-vibration AC servo drive device imported from Japan, high-resolution digital closed-loop controller.
2. Modular design, multi-channel data acquisition and analog output modules, and open data management can realize detection and control of load, deformation, displacement, speed change, etc.
3. The high-precision imported load sensor adopts high-precision 24 bits A/D, with a sampling frequency of 2000Hz and a maximum resolution of 1/1,00,000 for the entire force.
4. Equipped with a mobile control box, which is easy to move or install on the rack, displays the working status of the machine, and can provide the required control keys, positioning jog buttons and precision positioning thumb wheels during the test control process, which can efficiently move the vehicle. , fine-tuning can be accurate to 0.1 mm.
5. The host control box and the computer have two-way control, and are equipped with fine-tuning precision switches to facilitate fine-tuning control of distance and time after replacing the fixture according to special requirements.
6. Humanized open pneumatic clamp: In order to ensure that the material clamping must be at a vertical center point, the open pneumatic clamp can be completely fed into the upper and lower clamps, and manual intervention is required before clamping to prevent the material from breaking due to irregular clamping. The force value is inaccurate.
1. High-speed, low-vibration AC servo drive device imported from Japan, high-resolution digital closed-loop controller.
2. Modular design, multi-channel data acquisition and analog output modules, and open data management can realize detection and control of load, deformation, displacement, speed change, etc.
3. The high-precision imported load sensor adopts high-precision 24 bits A/D, with a sampling frequency of 2000Hz and a maximum resolution of 1/1,00,000 for the entire force.
4. Equipped with a mobile control box, which is easy to move or install on the rack, displays the working status of the machine, and can provide the required control keys, positioning jog buttons and precision positioning thumb wheels during the test control process, which can efficiently move the vehicle. , fine-tuning can be accurate to 0.1 mm.
5. The host control box and the computer have two-way control, and are equipped with fine-tuning precision switches to facilitate fine-tuning control of distance and time after replacing the fixture according to special requirements.
6. Humanized open pneumatic clamp: In order to ensure that the material clamping must be at a vertical center point, the open pneumatic clamp can be completely fed into the upper and lower clamps, and manual intervention is required before clamping to prevent the material from breaking due to irregular clamping. The force value is inaccurate.
Product Related Standards
Determination of breaking strength and elongation at break (strip method)-GBT: GB/T 3923.1-2013
Determination of breaking strength and elongation at break (strip method) - ISO: ISO13934-1:2013
Determination of breaking strength and elongation at break (strip method)-AS: AS 2001.2.3.1:2001 (R2016)
Determination of breaking strength and elongation at break (strip method)-ASTM D: ASTM D5035-2011 (R2019)
Determination of breaking strength and elongation at break (strip method)-CAN/CGSB: CAN/CGSB-4.2NO.9.1-M90: R2013
Tensile properties-Determination of breaking strength: grab sample method-GBT: GB/T 3923.2-2013
Tensile properties - Determination of breaking strength: Grab sample method - ISO: ISO 13934-2:2014
Tensile properties-Determination of breaking strength: grab sample method-AS: AS 2001.2.3.2-2001 (R2016)
Tensile properties-Determination of breaking strength: Grab sample method-CAN/CGSB: CAN/CGSB-4.2NO.9.2-M90: R2013
Tensile properties - Determination of breaking strength: Grab sample method - ASTM D: ASTM D5034-21
Tear strength: trouser tearing method: GB/T 3917.2-2009
Tear strength: trapezoidal tear: GB/T 3917.3-2009
Tear strength: tongue tear: GB/T3917.4: 2009
Tear strength: wing tear: GB/T3917.5:2009
Tear strength: trouser tear method: ISO 13937-2:2000
Tear strength: trapezoidal tear: ISO 9073-4-2021
Tear strength: trapezoidal tear: ASTM D5587-2015 (R2019)
Tear Strength: Wing Tear: ISO 13937-3:2000
Tear strength: Tongue tear: ISO 13937-4: 2000
Tear strength of rubber or plastic coated fabrics: ISO 4674-1:2016: Method B
Tear strength: ASTM D2261-2013 (2017) e1
Tear strength: AS 2001.2.10: 1986 (R2016)
Textiles - Determination of bursting strength - Steel ball method:
GB/T 19976-2005
FZ/T 01030-2016 Method A
AS 2001.2.19:1988(R2016)
ASTM D3787-16 (2020)
ASTM D6797-2015
CAN/CGSB-4.2 NO.11.2-M89: 1989 (R2013)
Knitted fabrics and elastic woven fabrics - Determination of seam strength and expansion - Burst method: FZ/T 01030-2016 Method B
, Test method for elongation and recovery of wool fabrics: FZ/T 70005-2006
Determination of elasticity of fabrics - Part 1: Strip specimen method: EN14704-1:2005
Determination of elasticity of fabrics - Part 1: Strip specimen method: ISO 20931-1:2018/Amd.1:2021
Breaking strength and elongation test of coated fabrics: ASTM D751-19
Textiles - Test method for tensile elasticity of woven fabrics: FZ/T 01034-2008
Determination of coating peel strength of coated fabrics: FZ/T 01010-2012
Test method for tensile elastic recovery rate of knitted fabrics: FZ/T 70006-2022
Determination of slip resistance of yarns in woven fabrics - Part 1: Fixed seam opening method:
GB/T 13772.1-2008
ISO 13936-1:2004
Determination of slip resistance of yarns in woven fabrics - Part 2: Constant load method:
GB/T 13772.2-2008
ISO 13936-2:2004
Seam strength: strip method:
GB/T 13773.1-2008
ISO 13935-1:2014
Seam strength: Grab sample method:
GB/T 13773.2-2008
ISO 13935-2:2014
Seam slip strength & breaking strength: ASTM D1683/D1683M-2017 (2018)
Extensibility of knitted garment seams: AATCC TS-015
Test method for seam detachment of wool woven fabrics: FZ/T 20019-2006
Knitted fabrics and elastic woven fabrics - Determination of seam strength and elongation - Grab sample method: FZ/T 01031-2016
Tensile elasticity test: elastic recovery LTD03,
(FZ/T70006-20004, FZ/T01034-2008, FZ/T70005-2006) ISO13936.1 and 2, ASTMD434, ASTMD4034, ISO13934.1 and 2, ISO13935.1, MS
P11, P12, P13, P14, NXT16, NXT21, NXT25
Seams Standard test for determining the slip resistance of yarns in woven fabrics: ASTM D434
Test method for gap strength of textile fabrics: JIS L1093
Adhesive lining peel strength test method: FZ/T 01085-2018
Attachments
1. Instrument manual.
2. Instrument warranty card
3. Third-party laboratory calibration report
