Footwear Static Anti-slip Testing Machine
HY-782PS
By using slip resistance testing equipment to check te quality of the shoes, After such a test by Footwear Slip Resistance Tester before selling to customer , which can greatly reduce the accidents caused by non-slip shoes.
Quantity:
Through different media (wooden boards, PVC, tiles or specified), apply the specified load, set the specified
friction times and speed. To measure the friction of the sole to determine the anti-slip performance of the shoes
Anti-slip test method
Slip resistance tester Use different media (wooden board, PVC, tile or specified), specified load, set specified friction times and speed. To measure the friction coefficient of the sole to determine the anti-slip performance of the shoe. This is Static Friction Coefficient Tester, follows ISO 20344 Slip Resistance Tester methods, ISO 13287 Slip Resistance, TM144 slip resistance, ASTM F2913 Anti-Slip Tester methods, can be also use for Non-Slip Tester for Safety Shoes. By using slip resistance testing equipment to check te quality of the shoes, After such a test by Footwear Slip Resistance Tester before selling to customer , which can greatly reduce the accidents caused by non-slip shoes.
Based on Standard:
"GB/T3903.6-2017 Footwear Whole Shoe Test Method Anti-slip Performance"
GB/T28287, EN ISO13287, SATRATM144, ASTM F2913
"GB/T3903.6-2017 Footwear Whole Shoe Test Method Anti-slip Performance"
GB/T28287, EN ISO13287, SATRATM144, ASTM F2913
Parameters and specifications：
1. Maximum vertical pressure: 1000N
2. Maximum horizontal pressure: 1000N
3. Sliding speed: (0-0.3±0.03) m/s adjustable
4. Active slide stroke: 0-200MM
5. Vertical sensor: 2KN one
6. Horizontal sensor: 2KN two
7. Sensor accuracy: ±0.5%
8. Vertical pressure control accuracy: ±1%
9. Vertical pressure control time: 0-set value, less than 0.2 seconds
10. Planetary reducer: Japan Xinbao PLF80 Reduction ratio 1:9
11. Precision linear guide: Taiwan Hiwin BRH15A2L703N
12. Brake clutch: EFUL-Z-050 Taiwan Yanxin
13. Transmission synchronous belt: 5MX2300 South Korea Samsung
14. Displacement sensor: Japan Rhine 1000P. Accuracy 0.001MM
15. Work surface: 600X320MM (made of aluminum alloy)
16. Test plate: EN13287, TM144 standard tiles, stainless steel plate
17. Control motor: Japan Panasonic MHMD082G1U 750W servo motor
18. Pressurization system: controlled by Japanese SMC proportional valve, computer setting, automatic pressurization.
19. Taiwan industrial computer, 17-inch monitor, laser printer set.
20. Sample rack: made of 6063 aluminum alloy,
21. Control software: a set of anti-slip special software developed by Hengyu Company.
22. Force cylinder: Japanese SMC63X200 standard cylinder.
23. Protection device: leakage protection, pressurized overload protection, air buffer stroke limit protection. Emergency stop
switch protection.
