Peeling Strength Tester
HY-746B
This machine is suitable for testing the peel strength between the sole and upper of the finished shoe.
Quantity:
Product description
The Peel Strength Tester, also known as the peel off strength tester, operates on the principle of placing shoes on the machine’s last, using a stripping knife to peel the seam between the sole and upper, and measuring the force required for this process—known as the stripping force. The peel strength is calculated based on this force and the blade width. Equipped with touch screen control, it eliminates the need for manual calculations, allowing direct testing. As a key Bond Strength Testing Equipment, it ensures accurate evaluation of how well shoe components are bonded together.
The Peel Strength Tester, also known as the peel off strength tester, operates on the principle of placing shoes on the machine’s last, using a stripping knife to peel the seam between the sole and upper, and measuring the force required for this process—known as the stripping force. The peel strength is calculated based on this force and the blade width. Equipped with touch screen control, it eliminates the need for manual calculations, allowing direct testing. As a key Bond Strength Testing Equipment, it ensures accurate evaluation of how well shoe components are bonded together.
According to the standard
GB/T3903.3, BS1870, BS4676, SATRA TM404, ASTM D903 Peel Testing Machine
GB/T3903.3, BS1870, BS4676, SATRA TM404, ASTM D903 Peel Testing Machine
Technical parameters
Capacity: 100KG
Accuracy: ±1%
Control mode: PLC + touch screen control
The distance between the positioning rod and the tie rod: 50~70 mm;
Plate lifting range: 40 mm
Knife edge width: 20±0.1 mm and 10±0.05 mm
Knife edge up and down speed: 20±2mm/min (constant speed), with stepless adjustable rise and fall speed
Specimen table: adjustable up, down, front, back, left and right, suitable for peeling tests of all parts of the whole shoe
Volume: 603280cm
Weight: 80kg
Power supply: AC220V50HZ 120W
Capacity: 100KG
Accuracy: ±1%
Control mode: PLC + touch screen control
The distance between the positioning rod and the tie rod: 50~70 mm;
Plate lifting range: 40 mm
Knife edge width: 20±0.1 mm and 10±0.05 mm
Knife edge up and down speed: 20±2mm/min (constant speed), with stepless adjustable rise and fall speed
Specimen table: adjustable up, down, front, back, left and right, suitable for peeling tests of all parts of the whole shoe
Volume: 603280cm
Weight: 80kg
Power supply: AC220V50HZ 120W
Annexes
A. One 20mm and 10mm stripping knife
B. A pair of telescopic lasts
C. A set of product calibration device
D. A set of product manuals and an internationally recognized calibration report for the ASTM D903 Peel Testing Machine, validating the performance of the Peel Strength Tester as reliable Bond Strength Testing Equipment.
A. One 20mm and 10mm stripping knife
B. A pair of telescopic lasts
C. A set of product calibration device
D. A set of product manuals and an internationally recognized calibration report for the ASTM D903 Peel Testing Machine, validating the performance of the Peel Strength Tester as reliable Bond Strength Testing Equipment.
