Repeated Compression Fatigue Testing Machine
HY-772D
Designed to evaluate material compression performance. To use it, first accurately measure the thickness of the test piece, then place it between two rows of plates in the machine. Operating as a Dynamic Compression Testing Machine, it compresses the specimen by 50% of its thickness at a speed of 60 times per minute for 80,000 consecutive cycles. After testing, the piece is taken out, left to stand for 30 minutes, and re-measured to calculate the compression permanent deformation rate.
Quantity:
The Compression Fatigue Tester, compliant with standards including ISO 7214, JIS K6767, K6382, and ASTM F1800 Compression Tester, is designed to evaluate material compression performance. To use it, first accurately measure the thickness of the test piece, then place it between two rows of plates in the machine. Operating as a Dynamic Compression Testing Machine, it compresses the specimen by 50% of its thickness at a speed of 60 times per minute for 80,000 consecutive cycles. After testing, the piece is taken out, left to stand for 30 minutes, and re-measured to calculate the compression permanent deformation rate—making it a reliable Material Fatigue Resistance Tester.
Product Parameters:
- Test piece: (50X50)mm/(100X100)mm, thickness 20mm
- Compression rate: 60c.p.m
- Compression stroke: (0 ~ 50) mm adjustable
- Counter: LCD, 0~999,999
- Volume: 60X50X90cm
- Weight: 120KG
- Power supply: AC 220V 50HZ
Attachments:
- Compression Fatigue Tester manual.
- Dynamic Compression Testing Machine warranty card.
- Third-party laboratory calibration report for the ASTM F1800 Compression Tester, ensuring alignment with industry standards for this Material Fatigue Resistance Tester.
